SMARQ HOT TAPPING MACHINE
Description and advantages
The SMARQ hot tapping machine allows performing pressure-free or up to 16 bar under-pressure branches using any brand of saddles from ½” to 2”, PE outlet saddles PE32 and PE50, as well as through ball or gate valves.
It is extraordinarily light (2.2 kg), compact and resistant thanks to its alloy steel and heat-treated components. Its innovative damping system extends the hole cutters service life. Fitted with a valve to extract the shavings produced while drilling.
The SMARQ tapping machine can be supplied with a pressure gauge kit to carry-out pressure tests before drilling the pipe, to check the correct tightness between tapping saddle and network pipeline.
- Compatible with threaded tapping saddles ½”, ¾”, 1”, 1¼”, 1½” and 2”; and OPTIMQ PE outlet hot tapping saddles PE32 and PE50.
- Tempered nickel-plated steel drill with the possibility to connect a pressure gauge to perform leakage tests.
- Shafts made of tempered ground stainless steel.
- Front needle bearing inside the drilling device, self-lubricated axial bearings and damping system.
- Drain valve to extract shavings produced while drilling.
- Transparent drain hose supplied with the SMARQ tapping machine.
REGISTERED OFFICE
Optim Quality, S.L.
Av. Diagonal 601, 8ª Planta
08028 Barcelona
WAREHOUSE
C/ Vic, 32 - Nave 3
08120 La Llagosta (Barcelona)
EMAIL
PHONE
(+34) 931 931 727