PE OUTLET HOT TAPPING SADDLES 32&50
Description and advantages
Polyethylene outlet hot tapping saddles are a world première, as they allow creating branches in under-pressure water networks by means of electrically weldable accessories or mechanical fastening without the need of threaded fittings.
They are manufactured in two different sizes: PE32 and PE50, which can be fitted with reducers to make PE25, PE40 and PE63mm connections as well. They are installed on polyethylene, PVC, fibre cement and ductile iron pipes with a nominal diameter from 60 to 350mm.
The OPTIMQ PE outlet hot tapping saddle consists of a body made of ductile cast and an outlet pipe of PE. The saddle is fastened to the pipe by means of a simple strap made of 50×1.5mm stainless steel coated with a rubber profile that insulates and improves the adherence to the pipe.
- Available saddle sizes PE32 and PE50.
- Compatible with pipes made of ductile cast, fibre cement, PE and PVC-O.
- Pipe range according to saddle size:
- PE32: on ductile iron pipes from 60 to 300, fibre cement pipes from 60 to 300-D and PE and PVC-O pipes from 75 to 315.
- PE50: on ductile iron pipes from 80 to 350, fibre cement pipes from 80 to 350-D and PE and PVC-O pipes from 90 to 400.
- Nominal pressure: PN16.
- Permissible working pressure (PWP):
- PN32: 16 bars, except in the case of ductile iron connections of 60, and PE or PVC of 63, the pressure of which is 10 bars.
- PN50: 16 bars, except in the case of ductile iron connections of 80, and PE or PVC of 75, the pressure of which is 10 bars
- Manufactured according to the European standard EN545.
- Ductile cast saddle body, blue epoxy-coating certified for drinking water. Epoxy-coating thickness between 250 and 500 microns.
- EPDM rubber joint according to EN 681-1 standard for water pipelines.
- Polyethylene pipe PE100 SDR11 certified for drinking water.
- Safety sleeve and inner crown made of technological plastic with glass fibre, certified for drinking water.
- Straps made of AISI 305 stainless steel and insulating EPDM rubber profile in blue.
- The studs of the steel traps are made of A2 stainless steel and the nuts are made of A4 stainless steel.
Related saddles and connectors
Compatible tools
REGISTERED OFFICE
Optim Quality, S.L.
Av. Diagonal 601, 8ª Planta
08028 Barcelona
WAREHOUSE
C/ Vic, 32 - Nave 3
08120 La Llagosta (Barcelona)
EMAIL
PHONE
(+34) 931 931 727